Showing 161–168 of 352 results
-
Stacked-Tips Fixed Manual Water Monitor
Description:- This fire water monitor is a stainless steel construction;
- Flow rate is adjustable from 30 LPS to 50 LPS with stacked-tips nozzle;
- Jetting pattern is Straight stream;
- It can 360° rotate horizontally and -45° to +85° elevate vertically;
- Flange standard: BS4504,ANSI150,GB,etc.
- Waste Recycling
- Bio-Mass Plants
- Timber Yards
- Marine & Off-Shore Sectors
-
Selectable Flow Hand wheel Control Fire Water Monitor 03
Description:- This fire monitor is made of 304stainless steel;
- The flow rate is adjustable, from 1200 LPM to 2400 LPM;
- The jetting pattern can change into either straight stream or fog;
- The flange standards are various, BS4504,ANSI150,GB,etc.
- Timber Yards
- Marine & Off-Shore Sectors
- Major Industrials
- Fuel Storage Sites
- Oil & Gas Installations
-
Hand wheel Control Manual Foam Monitor
Description:- Aluminum alloy construction
- Hand wheel Control
- Flow Rate: 24/32/48 LPS (optional)
- Available for water and foam both
- 360° rotations horizontally
- -45° to +90° elevate vertically
- Flange standard: BS4504,ANSI150,GB,etc.
- Bio-Mass Plants
- Timber Yards
- Marine & Off-Shore Sectors
- Major Industrials
- Fuel Storage Sites
- Oil & Gas Installations
-
Fire Fighting Foam Water Monitors
Description:- foam jetting range is 60 meters, and the max
- water jetting range is 65 meters
- 304 Stainless Steel construction
- Double Hand wheel Control
- Flow Rate: 24/32/40/48/64 LPS (optional)
- Available for water and foam both
- 360° rotations horizontally
- -45° to +90° elevate vertically
- Flange standard: BS4504,ANSI150,GB,etc.
- Timber Yards
- Marine & Off-Shore Sectors
- Major Industrials
- Fuel Storage Sites
- Oil & Gas Installations
-
-
DESCRIPTION
Characteristics- Precise installation around critical fire sources. Fire suppression agent is transported through a special hi-tech polymer tube exactly to the origin of the fire.
- The flexible polymer tube is heat sensitive along its entire length, which is the equivalent of having a full detection line.
- High and low pressure systems available with Carbon Dioxide and HFC-227 agents offering most adequate solutions for each application, ensuring no corrosion, electrical non conductivity and no production of residues upon discharge.
- New valve technology, incorporating integrated ball valve and pressure regulated exit (high pressure systems) avoid accidental discharges during transportation, manipulation and installation.
- No external power supply required. System is 100% pneumatically / mechanically actuated.
-
-
DESCRIPTION
Characteristics- Easily refilled locally.
- Electrically nonconductive.
- High pressure filling, allows for delocalized cylinder location from the protected risk.
- Can be configured to protect various risks with only one system.
- Visibility is not reduced upon discharge.
- Ability to reach hidden fires.
- Cutting off or diluting the source of oxygen, reducing its concentration to below 15%, extinguishing the fire in 60 seconds.
- Since fire is suppressed by reducing the concentration of oxygen in the air, achieved by increasing the concentration of the inert gas discharged, these gases can only be applied by total flooding, requiring minimum air tightness in the room.
- Including but not limited to Data Centers, server rooms and general IT facilities, telecommunications, industrial risks, libraries, archives, museums, art galleries, flammable liquids storage, transformer rooms.
