Description : Multistage, close-coupled borehole pump with the hydraulic part below the motor. Canned-stator submersible motor, cooled by the flow of pumped liquid. High-flow design of impellers. Impellers and diffusers in fiberglass reinforced technopolymer. Outer liner, stator sleeve and upper delivery head made in AISI304 stainless steel.

• Max. flow rate: up to 12 m3/h.
• Max. head: up to 59 mt (depending on the model).
• Power range: from 0,75 kW up to 1,5 kW both single-phase and three-phase power supply.
• Pump diameter: 127 mm.

Download :

• DIVER HF – TECHNICAL SHEET
• DIVER HF – INSTRUCTION

Description : Multistage, close-coupled borehole pump with the hydraulic part below the motor. Canned-stator submersible motor, cooled by the flow of pumped liquid. Impellers and diffusers in fiberglass reinforced technopolymer. Outer liner, stator sleeve and upper delivery port made in AISI304 stainless steel.

• Max. flow rate: up to 4,8 m3/h.
• Max. head: up to 101 mt (depending on the model).
• Power range: from 0,55 kW up to 1,5 kW both single-phase and three-phase power supply.
• Pump diameter: 127 mm.

Download :

• DIVER – TECHNICAL SHEET
• DIVER – INSTRUCTION

Description : 4” submersible asynchronous two-pole electric motor made entirely of AISI 304 stainless steel for the parts in contact with water. The 4TWX version entirely in AISI 316 stainless steel is available on request.

• Flanging: NEMA 4”.
• Protection class: IP68.
• Max operating depth: 300 m.
• Max. starts: 20/h.

Download :

• 4TW 4TWX – TECHNICAL SHEET
• 4TW-4TWX – INSTRUCTION
• SUBMERSIBLE PUMPS AND MOTORS – BROCHURE

Description : Multistage semiaxial submersible electric pumps for wells measuring 6” or above, able to generate a broad range of flow rates and heads. They are used extensively for the lifting, distribution and pressurisation of industrial water systems, the supply of pressure vessels and tanks, firefighting systems and irrigation systems. Application with clean, non-aggressive water free from solids or abrasive substances.

• Operating range: up to 84 m3/h with head up to 452 m.
• Pumped liquid: clean, free of solids and abrasives, chemically neutral, with properties similar to water.
• Maximum permitted amount of sand: 40 g/m3
• Installation: horizontal or vertical

Download :

• SMC 6-8-10-12 – TECHNICAL SHEET
• SMC 6-8-10-12 – INSTRUCTION
• SUBMERSIBLE PUMPS AND MOTORS – BROCHURE

Description : Multistage mixed-flow borehole electric pumps, completely made in stainless steel (AISI 304L or AISI 316 on request), usable for wells from a minimum diameter equal to pump size or greater and capable of developing a wide range of Flows and Heads.

• Performance range: flow up to 290 m3/h and max head of 670 m.
• Max. ambient temperature: 30˚C (50°C available on request).
• Installation: horizontal or vertical, refer to the motor specification.
• Max. quantity of sand/silt: 50g/m3.

Download :

• SS6 – TECHNICAL SHEET
• SS7 – TECHNICAL SHEET
• SS8 – TECHNICAL SHEET
• SS10 – TECHNICAL SHEET
• SS – INSTRUCTION
• SS – TECHNICAL SHEET – 60HZ
• SS – COMMERCIAL LEAFLET

Description : Multi-stage submersible pump with built-in integrated electronics, designed to automatically start and stop the pump. Built-in electronic board, pressure switch, flow sensor and non-return valve. Anti corrosive and high-resistant constructive materials.

• Max. flow rate: up to 5,4 m3/h.
• Max. head: up to 46 mt (depending on the model).
• Power range: 2 single-phase models, 0,65 – 0,75 kW.
• Max. immersion depth: 12 m.

Download :

• DIVERTRON – TECHNICAL SHEET
• DIVERTRON – INSTRUCTION

Description : Diver 6 by Dab is a 6 inch multi-impeller submersible pump for clean water, designed for pressurization, reuse of rainwater, gardening and irrigation in residential building service. Diver 6 is ideal for use in rainwater recovery systems and for lifting water from a cistern or a tank to be used, for example, to water the garden or vegetable garden without using the water from the aqueduct. Available in automatic or manual version. The automatic version is a single-phase pump with float switch for protection against dry running. It does not require a control panel, the starting capacitor and overheating thermal protection are integrated in the motor. Equipped with carrying handle, stainless steel debris filter, non-return valve, and power cable with Schuko plug. The pump was redesinged to further increase reliability and handling.

• Flow rate maximum From 1 m3/h to 5,4 m3/h
• Head up to 46 m
• Maximum immersion depth 12 m
• Pump maximum diameter 150 mm
• Impeller/s material Technopolymer
• Maximum number of starts 20/h
• Motor insulation class IP 68
• Single phase power input 230 V 50 Hz
• Power cable (m) and plug 15 m H07RNF with power plug
• Possible type of installation Fixed or portable in vertical position

Download :

• DIVER 6 – QUICK GUIDE
• DIVER 6 – INSTUCTION – 50HZ