SWIMMING POOL PUMPS

Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential swimming pools.

swimmingPool1.1

E.SWIM

SWIMMING POOL PUMPS

Description

E.SWIM is the new electronic swimming pool pump with high energy efficiency made by DAB.
Designed for water circulation and filtration in residential and civil swimming pools, but also suitable for specific applications requiring the handling of aggressive liquids like fish farming, agriculture and industry.
AN INTELLIGENT INVESTMENT
The new e.swim is the best solution to dramatically reduce energy consumption.
A traditional pool pump indeed, consumes more current than all other utilities together.
E.SWIM should be on top of your list to really make your system more efficient and optimize costs electricity.

SwimmingPool1.2

EUROPRO HIGH FLOW

SWIMMING POOL PUMPS

Description

High performance self-priming centrifugal electric pumps with built-in high capacity prefilter. 2 or 4 pole motor completely isolated from the water. Extremely quiet and highly reliable, developed for water circulation and filtration in large swimming pool filtration systems. Thanks to the AISI 316 mechanical seal, they are also suitable for specific applications for the circulation of sea water.

Operating range up to 190 m3/h with head of up to 22 metres.
Pumped Liquid clean water, slightly dirty water, slightly aggressive water.
Pumped liquid temperature range up to 40 °C.
Installation horizontal position.
SwimmingPool1.3

PREFILTER RANGE

SWIMMING POOL PUMPS

Description

Cast iron prefilters complying with DIN 2501, with connection from DN 65 to DN 200.
They are provided with 3 or 4 closing knobs depending on the model, to ensure perfect sealing of the cap. Vessel and prefilter cap in cast iron, basket in stainless steel AISI 316.

The range of prefilters allows the use of monobloc normalised centrifugal pumps series NKM-G/NKP-G, from DN 40 to DN 150, for water circulation in large filtration systems.
The same filters can be used with normalised base pumps with joint (KDN) or with inverter MCE.

SwimmingPool1.4

EUROCOVER

SWIMMING POOL PUMPS

Description

Fully automatic submersible electric pump, large support base design to increase stability and the possibility of operation in positions not perfectly perpendicular to the soil.
Built-in float for automatic operation; efficient and maintenance-free pump.
Suitable for winter use on top of swimming pool covers, to remove rain water and prevent the cover itself from breaking due to the heavy weight of the accumulated water.

Operating range from 0.5 to 6 m³/h with head up to 6.5 metres.
Liquid temperature range from 0 °C to 35 °C (EN 60335-2-41).
Installation fixed or portable, vertical position (max. inclination 10°).
Free passage of solids 5 mm.

SALT WATER PUMPS

Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential swimming pools.

SwimmingPool1.5

MULTI 4 SW

SALT WATER PUMPS

Description

MULTI 4 SW is a self-priming multistage surface pump specifically constructed to pump salt water. Low noise and high pressure performance. Available with 4-Noryl impeller.

Technopolymer pump body, motor support, impellers, diffusers and diffuser body. All the metal parts in contact with water are made of AISI 316 stainless steel. Rotor shaft, impeller fastening nut. Carbon/ceramic mechanical seal and AISI 316 stainless steel mechanical parts. Continuous service asynchronous single phase motor. Built-in thermal-amperometric protection and permanently connected capacitor.

Operating range capacity up to 90 l/min; head up to 46 m.
Liquid temperature range from 0 °C to +35 °C for domestic use – from 0 °C to +40 °C for other uses.
Maximum suction capacity 8 metres.
Installation fixed or portable, horizontal position.
SwimmingPool1.6

MULTI 4 SW

SALT WATER PUMPS

Description

MULTI 4 SW is a self-priming multistage surface pump specifically constructed to pump salt water. Low noise and high pressure performance. Available with 4-Noryl impeller.

Technopolymer pump body, motor support, impellers, diffusers and diffuser body. All the metal parts in contact with water are made of AISI 316 stainless steel. Rotor shaft, impeller fastening nut. Carbon/ceramic mechanical seal and AISI 316 stainless steel mechanical parts. Continuous service asynchronous single phase motor. Built-in thermal-amperometric protection and permanently connected capacitor.

Operating range capacity up to 90 l/min; head up to 46 m.
Liquid temperature range from 0 °C to +35 °C for domestic use – from 0 °C to +40 °C for other uses.
Maximum suction capacity 8 metres.
Installation fixed or portable, horizontal position.

POND PUMPS

Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential swimming pools.

SwimmingPool1.7

NOVAPOND

POND PUMPS

Description

The models NovaPond are submersible pumps specially designed for the recirculation of water in garden ponds, to create waterfalls or other water features. They are designed to pump clean water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical installation. Environmentally safe.

Materials resistant to corrosion and oxidation. Motor with thermal overload protection.
Adjustable suction filter to enable transit of solid particles with a diameter from 5 mm to 10 mm.
Supplied with power cable and plug, and self-sealing coupling.

Operating range from 1 to 14 m3/h with head up to 9.4 metres. Suitable for continuous operation.
Liquid temperature range from 0 °C to +35 °C.
Pumped liquid clean water, without fibres and with particles with maximum diam. 10 mm.
Max. immersion depth 7 metres.

Create A product first!

Create a product first please!