E.SYLINE PRODUCTS

e.syline, the line of electronic water pressure booster systems that
redefines the rules of residential water pressurization.

1.1

E.SYBOX

E.SYBOX is DAB’s new integrated system for pressurization in domestic and residential areas.
E.SYBOX does not require any additional components for installation. It consists of a self-priming multistage pump, electronic inverter management, flow and pressure sensors, high-resolution swivel LCD display and an integrated 2 liter expansion tank. It can be installed both vertically and horizontally and even in tight spaces without a high air exchange. The water-cooled engine, the hull protection in ABS with sound-absorbing function, the vibration damping feet and electronics make it an absolutely quiet (45 dB) and compact. The wireless device facilitates the creation of pressurization units and connectivity with other DAB devices.
Degree of protection IP X 4
Insulation class F
Pumped liquid clean, free from solids or abrasive, non- aggressive, non-viscous, crystallized and not chemically neutral.
Maximum liquid temperature 40° C
Maximum ambient temperature 50° C
Maximum suction depth self priming up to 8 metres. Maximum working pressure: 8 bar (800 kPa).
1.2

E.SYBOX MINI

E.SYBOX mini is the DAB compact automatic pressurization system for the water supply of a single dwelling. E.SYBOX mini guarantees the comfort of constant pressure (Pressure Set Point adjustable from 1 up to 5 bar) inside the system, and energy savings thanks to the inverter technology. Suitable for use with drinking water, in domestic systems, and in gardening applications. E.SYBOX mini does not require any additional components for its installation. It consists of a high frequency self-priming double impeller pump, management inverter electronics, pressure and flow sensors, adjustable high resolution LCD display with 1 liter built-in expansion vessel, and cartridge check valve. The double suction and delivery ports allow both vertical and horizontal installation. Thanks to its compact sizes, installation is also possible in difficult places without high air exchange.

Operating range capacity up to 80 l/min; head up to 50 m.
Liquid quality requirements clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallized and chemically neutral.
Liquid temperature range from 0°C to +35°C for domestic use
for other use from 0°C to +40°C
Maximum suction depth 8 meters
Maximum ambient temperature +50°C
Maximum operating pressure 7,5 bar (750 kPa) Motor protection rating: IPX4
Insulation class F
Installation Horizontal or vertical fixed position
Special executions on request alternative types of electrical plug
1.3

E.SYTWIN

E.sytwin is the evolution of e.sydock, of which maintains all the benefits, for the creation of two groups of pumps. e.sytwin offers exceptional performance thanks to possibility of combined operation with a reduced size of 50% compared to any other equivalent traditional system.

1.4

E.SY TANK

Tank specially studied to better integrate with e.sybox and equipped with:

  • E.sydock (specially versioned) for quick connection.
  • Suction hose with foot valve
  • Filling valve from the water supply with float
  • Overflow
  • Flow connection
  • Preparation for ground mounting
  • Inspection plug

Capacity 500 L with the possibility of expansion on 3 sides.

E.SYTANK AUXILIARY CITERN

The E.SYTANK AUXILIARY CITERN is supplied without any fittings or the E.SYDOCK. The tank has a modular design to couple easily with other E.SYTANK units, making the system expandable to the necessary capacity. It can be connected on three sides (at side and rear) using the E.SYTANK TANK COUPLING KIT

E.SYTANK COUPLING KIT

The E.SYTANK COUPLING KIT is composed of a PVC sleeve with gasket (D.160 mm L=150), two PVC aligning pipes (D.50mm x L=60) and a connecting ring nut for a 2-pump option. It allows the connection of several E.SYTANK units or between E.SYTANK and E.SYTANK AUXILIARY CITERN.

E.SYTANK OPTIONAL DELIVERY KITK

Composed of a 1” PP pipe. It allows an auxiliary delivery for single tank systems or with the COUPLING KIT it allows several E.SYTANK and E.SYBOX systems to be linked together and to create pressure boosting units with several pumps and tanks.

1.5

E.SYDOCK

Thanks to the 4 plumbing configuration possibilities offers an ‘installation even more rapid, easy and flexible. It is complete with all the interfaces required for connecting to the system. It incorporates anti vibration feet to ensure the same quietness as e.sybox

1.5

E.SYBOX ACCESSORIES

3-PIECE UNION Kit consisting of 2 x 3-piece unions, to facilitate the connection of E.sybox and E.sybox mini to the system.
E.sywall Kit complete with brackets, screws, dowels and two accessories for absorption of vibrations.
E.sydock Thanks to the 4 plumbing configuration possibilities offers an ‘installation even more rapid, easy and flexible. It is complete with all the interfaces required for connecting to the system. It incorporates anti vibration feet to ensure the same quietness as e.sybox
E.sytwin e.sytwin is the evolution of e.sydock, of which maintains all the benefits, for the creation of two groups of pumps. e.sytwin offers exceptional performance thanks to possibility of combined operation with a reduced size of 50% compared to any other equivalent traditional system.
E.sytank

Tank specially studied to better integrate with e.sybox and equipped with:

e.sydock (specially versioned) for quick connection.
suction hose with foot valve
filling valve from the water supply with float
Overflow
flow connection
preparation for ground mounting
inspection plug
Capacity 500 L with the possibility of expansion on 3 sides.

E.SYTANK AUXILIARY CITERN The E.SYTANK AUXILIARY CITERN is supplied without any fittings or the E.SYDOCK. The tank has a modular design to couple easily with other E.SYTANK units, making the system expandable to the necessary capacity. It can be connected on three sides (at side and rear) using the E.SYTANK TANK COUPLING KIT
E.SYTANK COUPLING KIT The E.SYTANK COUPLING KIT is composed of a PVC sleeve with gasket (D.160 mm L=150), two PVC aligning pipes (D.50mm x L=60) and a connecting ring nut for a 2-pump option. It allows the connection of several E.SYTANK units or between E.SYTANK and E.SYTANK AUXILIARY CITERN.
E.SYTANK OPTIONAL DELIVERY KITK Composed of a 1” PP pipe. It allows an auxiliary delivery for single tank systems or with the COUPLING KIT it allows several E.SYTANK and E.SYBOX systems to be linked together and to create pressure boosting units with several pumps and tanks.
E.sylink E.sylink is the DAB accessory with wireless interface 802.15.4, designed to allow the E.SYBOX to use 4 digital inputs (pressure switch, float, etc.), to control 2 relay outputs (alarms, etc.) and to offer the possibility of connecting an auxiliary pressure sensor
KIT E.SYLINK * e.sylink with power supplier and electric box.
KIT E.SYLINK + PRESSURE SWITCH* e.sylink with power supplier, electric box and pressure switch
1.2

E.SYBOX MINI

Up to 3 floors, 2 bathrooms and 50m2 of garden.

1.1

ESYBOX

Up to 6 floors – Max 9 apartments.

1.3

ESYTWIN

Up to 9 floors – Max 17 apartments

Create A product first!

Create a product first please!